Connecting devices
Preparation for use and operation
A26361-K547-Z400-1-7419
English - 11
Connecting the monitor to the electricity supply
Ê
Follow the instructions contained in the monitor manual to prepare the monitor for operation.
Ê
Plug the data cable of the monitor into the monitor port of the workstation.
1
1
2
Ê
Depending on the connector, plug the monitor power cable into either the workstation (1) or the
grounded mains outlet (2).
!
You may only plug the monitor power cable into the monitor connector of the workstation
if the rated current of the monitor is less than 1.5 A (230 V) or 3 A (115 V). The rated
current for the monitor is given on the monitor itself and in the Operating Manual for the
monitor.
