background image

Important notes

Manufacturer's notes

4

A26361-K520-Z100-1-7619

Manufacturer's notes

Energy saving

When the PC is delivered, some energy-saving functions are already set (see the Technical Manual
for the system board or the manual "BIOS Setup").

• 

If you are not using your PC, switch it off.

• 

In the 

BIOS Setup

 you may set further energy-saving functions for the PC (see the Technical

Manual of the system board or in the manual "BIOS Setup").

Energy saving under Windows NT

If the attached monitor and screen controller support power management in accordance with VESA
(DPMS), the screen saver 

Powersaver

 ("Drivers & Utilities" CD) can be used to switch the monitor

into power management mode.

Energy saving under Windows 95

The 

Screen Saver

 tab allows you to set further energy-saving functions for your screen. Select the

following item in the 

Start

 menu: 

Settings - Control Panel - Display - Display Properties - Screen Saver -

Energy saving features of monitor

.

Energy saving under Windows 98

In the 

Start - Settings - Control Panel - Power Management

 menu you can set additional power-

management functions.

Disposal and recycling

This device has been manufactured to the greatest possible degree from materials which can be
recycled or disposed of in a manner that is not environmentally damaging. The device is taken back
after use, so that it can be recycled, provided that it is returned in a condition which is the result of
normal use. Any components not recuperated will be disposed of in an environmentally acceptable
manner.

For devices marked with this symbol Siemens AG offers a guarantee for
36 months with a Bring-in-Service. The guarantee starts on the day of
delivery (sale date) by Siemens or a Siemens partner.

We herewith declare that it will be possible to repair any device marked with
the eco-label for at least 5 years after production of that device has
discontinued.

Information on power management and energy saving mode can be found in
chapter "

Technical data

".

Do not throw lithium batteries or accumulators into the trashcan. They must be disposed of in
accordance with local regulations concerning special waste.

If you have any questions on disposal, please contact your local office, our service department, or,
directly:

Siemens AG
Recyclingcenter
D-33106 Paderborn

Tel.: 49 5251 818 010 / Fax: 49 5251 818 015

Содержание SCENIC6511


























































Отзывы: