Preparation for use and operation
Connecting the PC to the line voltage
14
A26361-K520-Z100-1-7619
Connecting the PC to the line voltage
100 V - 125 V
200 V - 240 V
1
1
1 = Notch for inserting the screwdriver
Check the rated voltage.
!
The value marked with an arrow must agree with the local line voltage:
115 = 100 V to 125 V 230 = 200 V to 240 V
If the rated voltage does not agree with the local line voltage, lift out the plug-in unit with a
screwdriver (1), turn it and replace it.
2
1
Plug the system unit's power cable into the system unit (1) and then into the grounded power
outlet (2).
