Fujitsu ScanSnap iScanner fi-6010N, Руководство оператора, Страница: 352 / 665

314
6.4 Sending the Scanned Data by e-Mail
1. On the "Main Menu" screen, press the [e-Mail] button.
The "Send e-Mail" screen appears.
2. Enter distribution list names or e-mail addresses in "To", "Cc", and "Bcc" fields.
Enter a distribution list name to send a single e-mail to multiple e-mail addresses contained
in the distribution list.
For more details about e-mail address setting values, refer to
"B.1 e-Mail Address Setting
Values" (page 490) .
To enter multiple e-mail targets, separate each e-mail target with a ";". A scan can be sent to
a maximum of 30 e-mail targets at any one time.
ATTENTION
If an LDAP server is set, register the user e-mail address with the
LDAP server. If not registered, e-mails cannot be sent.
HINT
The scan information can be changed by pressing the [Scan Settings] but-
ton.
For more details, refer to
"6.9 Setting the Scan Options" (page 365) .
HINT
e-Mail addresses can be selected directly from the e-mail address book.
For details, refer to
"6.4.1 Selecting an e-Mail Target from the e-Mail
Address Book" (page 319) .