Fujitsu ScanSnap iScanner fi-6010N, Руководство оператора

Страница: 321 / 665

5.14 Viewing the Scanners Operating Status
fi-6010N Network Scanner Operator's Guide 283
5
■
Filter Conditions
Filters the scanners displayed in the scanner list.
z Scanner Name
Enter a part of or entire scanner name of the scanner to be filtered.
This may be up to 15 characters long.
z IP Address
Enter a part of or entire IP address of the scanner to be filtered.
This may be up to 15 characters long.
z Settings Group
Select the settings group of the scanner to be filtered.
The default is "(All)".
z Add-in Group
Select the Add-in group of the scanner to be filtered.
The default is "(All)".
z Comment
Enter the description of the scanner to be filtered.
z Status
Select the operating status of the scanner to be filtered.
The default is "(All)".
z [Apply] button
Apply the entered filter conditions and refresh the list.
■
[Clear All Errors] Button
Clear all error marks shown on the "Scanner Operation Monitor" window.
If there are multiple pages of scanner operating status, the status of all error marked scanners are
cleared.