Chapter 3 How to Use the Operator Panel
53
The operator panel consists of buttons and indicators.
Names and Functions
3.1 Operator Panel
Check
Scan
/Stop
Power
Check indicator
Lights or flashes in orange when an error occurs.
[Scan/Stop] button (*1)
Launches the linked application software.
Clears the displayed error indication.
Cancels the scan.
[Power] button
Turns the power on/off.
*1: For details about how to scan by pressing the [Scan/Stop] button, refer to the scanner driver Help (included in the Setup DVD-ROM) or
Button on the Scanner to Start Scanning" (page 68)
.
Power indicator
Lights in green when the scanner is turned on.
This indicator flashes immediately after the scanner is turned on,
when resuming from power saving mode, or when a device error
occurs.