![Fujitsu ScanPartner SP25 Скачать руководство пользователя страница 17](http://html.mh-extra.com/html/fujitsu/scanpartner-sp25/scanpartner-sp25_operators-manual_120840017.webp)
Chapter 1 Scanner Overview
17
This section shows the names of the scanner parts.
ScanPartner SP25/ScanPartner SP30
■
Front
1.2 Parts and Functions
Stacker
Stacks up the ejected documents.
Operator panel
Consists of buttons and indicators (LED).
Can be used to operate the scanner or
check the status.
For details, refer to
.
ADF (Automatic Document Feeder)
Pulls and feeds the documents one sheet at
a time from the ADF paper chute (feeder).
Open to replace consumables or clean the
inside of the scanner.
Side guide
Guides the documents in the width
direction as they are fed into the scanner.
Chute extension 2
Pull out to adjust to the document length.
ADF paper chute (feeder)
Holds the documents to be scanned.
ADF release tab
Pull this tab to open the ADF.
Stacker extension 2
Lift up to adjust to the document length.
Chute extension 1
Pull out to adjust to the document length.
Stacker extension 1
Slide out to adjust to the document length.
Stacker extension 3
Lift up to adjust to the document length.