Fujitsu S140, Руководство пользователя

Страница: 24 / 115

24
U41161-J-Z126-1-76
Switching the S140 on and off using the control panel Switching on and off
When both systems are ready, i.e. all windows on the 3970-SKP have been opened and the
LCD display on the S140 no longer shows any P codes, you can log in on the SVP (see
page 37ff) and start the BS2000 system via PROGRAM LOAD FRAME: DETAIL-1 (see
page 55).
If a POWER ON IPL is configured, the system is loaded automatically (see page 75
AUXILIARY FRAME: LOAD PRESET1).
Switching off
After BS2000 has been shut down, the S140 can be switched off by pressing the
STAND-BY button on the S140 control panel (see page 16) or by selecting the menu item
POWER STAND-BY in AUXILIARY FRAME: POWER STAND-BY/IMPL (see page 74).
The SKP is switched off as follows:
There are three options for terminating the SINIX system of the SKP:
1. You call the basic menu of your window administration program by clicking on the gray
window background using the right mouse button. This menu contains the item “Exit
system”. Selecting this item allows you to initiate the termination of the system. As a
result of this selection, “<computer name>: shut down” is output. Then carry out the
following actions:
Ê Activate the root password field using the left mouse button and enter the password
for the user ID root.
Ê Select the Init status by
Ê positioning the cursor over the “Shut down” button,
Ê pressing the left-hand mouse button,
Ê holding the mouse button down, positioning the cursor on the desired entry of
the opened menu (“Shut down” or “Restart”) and
Ê releasing the mouse button.
Ê Carry out the desired function by clicking the “Start” button.
2. You can also terminate the SINIX system by
Ê logging in as the system administrator,
Ê entering the shell command shutdown (for shutting down the system) or
Ê the shutdown -i6 command (for shutting down and restarting the system).