Fujitsu S120 Series, Руководство по эксплуатации

Страница: 70 / 109

70
U41182-J-Z126-1-74
User frames and subframes Standard processing in SVP mode
6.4.8.4 (AU4) AUXILIARY FRAME: POWER STAND-BY/IMPL
Figure 39: AUXILIARY FRAME: POWER STAND-BY/IMPL screen
By making an entry in this frame and pressing , you can switch the S120 off or re-
initialize it.
FUNCTION => The following function is selected after the corresponding number has
been entered:
1 POWER STAND-BY switches S120 off, order: first devices connected to
the PCI (Power Control Interface), then CPU (further
information on this can be found on page 16 and
page 20)
2 IMPL executes IMPL
After you have selected a function and pressed , the following prompt will
appear:
The IMPL or POWER STAND-BY must not be executed during system
operation! If this instruction is not heeded, BS2000 will be terminated
abruptly!
Ê Press and to switch off the system or to execute an IMPL, or
and to cancel the procedure.
----- AUXILIARY FRAME: POWER STAND-BY/IMPL ----- E45L01G
FUNCTION=>
*1 POWER STAND-BY
*2 IMPL
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = D90557 3 00000I00
RA M []-[]00
ENTER
ENTER
***********************************
* *
* ARE YOU SURE ? (ENTER Y OR N) N *
* *
***********************************
!
Y ENTER
N ENTER