Fujitsu S120 Series, Руководство по эксплуатации, Страница: 37 / 109

U41182-J-Z126-1-74
37
Standard processing in SVP mode General frame structure
6.2.1 System status messages in line 22
Figure 21: Format of the status display in line 22
Meaning of the status information in line 22:
Column Symbol Meaning
16 – 19 CL -0 Cluster ID of the S120
22 – 27 none
HOST
GUEST The system is operated in BS2000-NATIVE mode.
The CPU is occupied by the VM2000 monitor system.
The CPU is occupied by a VM2000 guest system.
28 – 32 CPU - 0 Display of the CPU.
33 – 37 CHP - 0 Display of the channel processor CHP - 0.
40 – 45 none
CLKSTP
I-STEP
H-STOP The system is in the normal state.
The system is in the clock-stop state.
The system is in the instruction step state.
The system is in the hardware stop state.
1 2 3 4 5 6 7 8
SYS-DOWN
CL-STOP
CHK-STOP
COMP-STOP
STOP
WAIT
RUN
LOAD
I-STEP
CLKSTP
.... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0
CHP-0 CPU-n
HOST
GUEST
CL-n PSW = xxxxxxxx xxxxxxxx
Cluster ID
HOST/GUEST
Target CPU
Target CHP
Rate control
System status
PSW content
H-STOP