Fujitsu PRIMERGY TX300 S5, Инструкция по настройкам

Страница: 61 / 142

TX300 S5
Options Guide 61
Accessible drives HDD extension box
Ê Attach the front cover or rack front cover, close the server, connect it to the
power outlet, and switch it on as described in
chapter "Completion" on
page 123 .
6.4.2 2.5-inch HDD extension box
The HDD extension box for 2.5-inch HDD modules contains eight bays for 2.5-
inch HDD modules. It requires a redundant power supply (see operating
manual) and an additional SAS/SATA RAID controller (see chapter
"Expansion
cards" on page 65 ).
Figure 37: Attaching EasyClick rails to 2.5-inch HDD extension box
Ê
Screw the EasyClick rails onto either side using two M3 x 3.5 mm screws.
V
CAUTION!
Longer M3 screws may damage the drive!
The M3 x 4.5 mm screws of a dummy cover are too long and must not be
used.