Fujitsu Primergy TX300 S4, Руководство пользователя

Страница: 207 / 276

207
PRIMERGY TX300 S4 User’s Guide
„
LAN Settings submenu
This submenu is for LAN settings for when performing remote operation by using
RemoteControlService.
7.2.11 Security Menu
This menu is for setting security options.
table: LAN Settings submenu
Item Setting Description
DHCP • Disabled (Initial value)
• Enabled
Sets whether to acquire LAN IP address of the Remote
Management Controller port from the DHCP server.
Local IP address [000.000.000.001]
Enter the IP address of the Remote Management
Controller port.
Subnet mask [000.000.000.000]
Enter the subnet mask of the Remote Management
Controller port specified in [Local IP address].
Gateway address [000.000.000.000]
Enter the gateway address of the Remote Management
Controller port specified in [Local IP address].
Service LAN • Disabled
• Enabled (Unchangeable)
Sets whether to enable the Remote Management
Controller port.
Service LAN Port Service (Unchangeable)
Appears when [Service LAN] is "Enabled".
table: Security menu
Item Setting Description
Setup Password Displays if a password required for the setup (setup password) is set.
When the password is not set, "Not Installed" is displayed.
When the password is set, "Installed" is displayed.
System Password
Displays if an administrator password (system password) is set.
When the password is not set, "Not Installed" is displayed.
When the password is set, "Installed" is displayed.
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu -/+
Enter
F1
Esc
Exit
F9 Setup Defaults
Advanced Security Server Exit Main
Setup Password
System Password
Set Setup Password:
Setup Password Lock:
Set System Password:
System Password Mode:
System Load:
Setup Prompt:
Virus Warning:
Diskette Write:
Flash Write:
TPM (Security Chip) Setting
Not Installed
Not Installed
[Press Enter]
[Standard]
[Press Enter]
[System]
[Standard]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
>