Fujitsu Primergy TX300 S4, Руководство пользователя

Страница: 205 / 276

205
PRIMERGY TX300 S4 User’s Guide
7.2.9 Power On/Off Submenu
This submenu appears when you select [Power On/Off] from the [Advanced] menu.
It is for power on/off settings.
table: Power On/Off submenu
Item Setting Description
Power-off Source –
Software Enabled (Unchangeable)
Sets whether to turn the power off by using the
program or the OS.
Power Button Enabled (Unchangeable) Sets whether to allow the use of the power switch
for turning the power off when the ACPI function is
disabled.
Power-on Source BIOS Controlled
(Unchangeable) Configures the power-on setting.
Remote • Disabled (Initial value)
• Enabled Sets whether or not the power is turned on when the
modem (connected to the serial port) receives a ring
signal.
LAN • Disabled
• Enabled (Initial value)
Sets whether to enable the power to be turned on
via LAN.
Wake Up Timer Disabled (Unchangeable)
Sets whether or not the power is turned on at a
certain time or after a certain time has passed.
Wake Up Time
[00:00:00]
Sets when to turn the power on by the timer.
Wake Up Mode Daily (Unchangeable)
Sets the interval to turn the power on by the timer.
Wake Up Day 1 (Unchangeable)
Sets the interval to turn the power on by the timer.
Power Failure Recovery • Always On
• Always Off
• Previous State (Initial
value)
Sets the power state of the server when the system
goes down due to abnormal power, or after turning
the power back on by UPS.
Note:
`
When using UPS, make sure to set to
"Always On".
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu -/+
Enter
F1
Esc
Exit
F9 Setup Defaults
Advanced Security Server Exit Main
Power On/Off
Power-off Source
Software:
Power Button:
Power-on Source
Remote:
LAN:
Wake Up Timer:
Wake Up Time:
Wake Up Mode:
Power Failure Recovery:
[Enabled]
[Enabled]
[Bios Controlled]
[Disabled]
[Enabled]
[Disabled]
[00:00:00]
[Daily]
[Previous State]