Fujitsu Primergy TX300 S4, Руководство пользователя

Страница: 198 / 276

198
Chapter 7 Configuring Hardware and Utilities
7.2.4 Boot Options Submenu
This submenu appears when you select [Boot Options] from the [Main] menu.
It is for setting system startup options.
table: Boot Options submenu
Item Setting Description
POST Errors Halt On All Errors
(Unchangeable) Sets whether to stop the boot process and shut down the
system, in case a POST (Power On Self Test) error is detected.
• No Halt On Any Errors
System startup does not stop and the OS starts up.
• Halt On All Errors
System startup is interrupted when POST completes, and the
system startup stops.
Keyboard Check • Disabled
• Enabled (Initial value) Sets whether to check keyboard connection during POST.
SM Error Halt • Disabled (Initial value)
• Enabled Sets whether to interrupt the system startup when an error
occurs in the fan or the temperature sensor.
Fast Boot Disabled (Unchangeable) Sets whether to reduce the scope of POST and thereby speed
up system startup.
Quiet Boot Disabled (Unchangeable) Sets whether to display a logo screen instead of POST
information.
NumLock Auto (Unchangeable) Sets the state of the NumLock key at startup.
Boot Menu Enabled (Unchangeable) Sets whether to enable the [F12] key which displays Boot
Menu.
MultiBoot for
HDs Enabled (Unchangeable) Sets whether to enable to specify the priority of hard disks to
read OS when installing multiple hard disk units.
Boot Sequence • CD-ROM Drive
• Diskette
• Hard Drive
• Legacy LAN Card
Press the [Enter] key to display [Boot Sequence].
Sets the boot sequence of the drives to read the OS. Change the
priority of the device being selected with the [+] and [-] keys.
To disable the boot from the device being selected, use the
[Space] key (The mark, "!" appears before the device name
when it is disabled). If nonexistent device is displayed, use the
[*] key to delete the device from the list.
PhoenixBIOS Setup Utility
Item Specific Help Boot Options
Select Item
Select Menu
Change Values
Select > Sub-Menu -/+
Enter
F1
Esc
Exit
F9 Setup Defaults
Advanced Security Server Exit Main
[Halt On All Errors]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Auto]
[Enabled]
[Enabled] POST Errors:
Keyboard Check:
SM Error Halt:
Fast Boot:
Quiet Boot:
NumLock:
Boot Menu:
MultiBoot for HDs:
Boot Sequence: >