Fujitsu PRIMERGY TX2550 M4, Руководство по модернизации и обслуживанию, Страница: 357 / 563

TX2550 M4 Upgrade and Maintenance Manual
357
Processor (CPU)
Supported CPUs
– up to two Intel
®
Xeon
®
CPUs (Platinum, Gold, Silver, Bronze)
– two CPU sockets P0 LGA 3647
– supported CPUs up to 205 W
– core frequencies of more than 3.5 GHz
– both CPUs must be of the same type
I
For system relevant information, see the hardware configurator of your
server available online at the following address:
http://ts.fujitsu.com/products/standard_servers/index.htm
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/
11.2 Upgrading to 2 CPUs configuration
V
CAUTION!
– CPUs are modules which are extremely sensitive to electro-static
discharges and therefore must always be handled with care. After a
CPU has been removed from its protective sleeve or from its socket,
place it with its smooth side down on a non-conducting, antistatic
surface. Never push a CPU over a surface.
– Only CPUs of the same type may be used on the system board. That
means the number of the internal CPU cores as well as the primary
clock and the QPI frequency have to be the same.
– For dual operation, use a suitable multiprocessor operating system.
Upgrade and Repair Unit
(URU) Hardware: 15 minutes
Software: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver