Fujitsu PRIMERGY TX1320 M5, Руководство по модернизации и обслуживанию, Страница: 87 / 407

For more information on iRMC settings, see the iRMC user guides.
5.3.8 Enabling replaced components in the BIOS
When a CPU, an expansion card, or a memory module fails, the defective
component will be set to
Disabled
or
Failed
in the BIOS. The server will then
reboot with only the intact hardware components remaining in the system
configuration. After replacing the defective component, it needs to be
reenabled in the BIOS.
▶
Enter the BIOS.
▶
Select the
Advanced
menu.
▶
Select the status menu of the desired component:
▶
Select
CPU Status
for CPUs.
This option is only available for multi-processor systems.
▶
Select
Memory Status
for memory modules.
▶
Select
PCI Status
for expansion cards.
▶
Reset replaced components to
Enable
.
▶
Save your changes and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
5.3.9 Verifying the system time settings
This task only applies to Linux and VMware environments.
After the system board has been replaced, the system time is set automatically.
By default, the RTC (Real Time Clock) time standard is set as the local time.
Basic software procedures
TX1320 M5 Upgrade and Maintenance Manual 87