Fujitsu PRIMERGY TX1310 M5 Скачать руководство пользователя страница 66

Страница: 66 / 265

If a Linux/VMware OS is used and the hardware clock has been configured as

UTC (Universal Time, Coordinated) in the OS, the BMC local time may not be

mapped correctly.

▶

After replacing the system board, ask the system administrator whether the

RTC or UTC time standard is to be used as system time.

If the system time (RTC) is set to UTC, the SEL (System Event Log)

time stamps may differ from the local time.

▶

Enter the BIOS.

▶

Select the

Main

menu.

▶

Under

System Time

and

System Date

specify the correct time and date.

By default, the system time set in the BIOS is RTC (Real Time Clock)

local time. If your IT infrastructure relies on universally accepted time

standards, set the

System Time

to UTC (Universal Time,

Coordinated) instead. Greenwich Mean Time (GMT) can be

considered equivalent to UTC.

▶

Save your changes and exit the BIOS.

For more information on how to access the BIOS and modify settings,

see the corresponding BIOS Setup Utility reference manual.

5.2.5

Viewing the System Event Log (SEL)

▶

Enter the BIOS.

▶

Enter the

Event Logs

menu.

▶

Click

View Smbios Event Log

For detailed information on how to view the SEL using BIOS, see the

"BIOS Setup Utility" reference manual.

Basic software procedures

Upgrade and Maintenance Manual

TX1310 M5

Содержание PRIMERGY TX1310 M5










































































































































































































































































Результаты поиска

Содержание PRIMERGY TX1310 M5

Отзывы:

Fujitsu PRIMERGY TX1310 M5, Руководство по модернизации и обслуживанию, Страница: 66 / 265

Результаты поиска

Содержание PRIMERGY TX1310 M5

Отзывы: