Fujitsu Primergy TX120, Руководство пользователя

Страница: 190 / 263

190
Chapter 8 Configuring Hardware and Utilities
8.1 Jumper Settings
The BIOS password setting can be deleted through the jumper settings.
` Do not change the jumper settings in normal use.
„
Jumper Location
The jumper of the server is located on the baseboard as shown below.
„
Jumper Settings
To change the setting, set the jumper as follows:
Functions and settings of each jumper are as follows:
table: Jumper Settings
Jumper
Number
Function Setting Description
JP1 BIOS recovery
1-2 (standard) Activates with the normal BIOS information.
2-3 Activates with the saved BIOS information.
JP2 BIOS password
recovery
1-2 Disables the BIOS password.
2-3 (standard) Enables the BIOS password.
JP3 Clear CMOS
1-2 (standard) Retains the information stored on CMOS.
2-3 Deletes the information stored on CMOS.
JP1
JP2
JP3
example)
Standard Setting (1-2) Changing the setting (2-3)