Fujitsu Primergy TX120, Руководство пользователя

Страница: 178 / 263

178
Chapter 7 Installing Hardware Options
7.6 Installing Internal Bay Options
This section explains how to install internal bay options. Unlike external devices, an
internal bay option does not need to be connected to the outlet because its power is
supplied from the server. In addition, it offers the advantage of space saving.
`
Before installing an internal bay option, install the OS and turn off the server once.
• When installing or removing internal bay options, turn off the server, all
peripheral devices, and any other connected devices. Also unplug all power
cables from the outlet.
Failure to do so can cause electric shock.
• Install our genuine internal bay options only.
Failure to do so may cause a device failure, fire, or electric shock.
• When installing or removing internal bay options, make sure to remove the
screws on the specified points only.
There is a chance of injury if screws other than those on the specified points
are removed. This could also damage the server.
• Touch only the specified part of the printed circuit board.
Failure to do so could cause injury and also damage the server.