Fujitsu PRIMERGY SX650 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 29

Fujitsu PRIMERGY SX650 Скачать руководство пользователя страница 25

25

PRIMERGY SX650 Storage Blade Hardware Guide

4

■

This product is not turned on.

Check the following. If you cannot solve the problem, leave this product as is and contact your

maintenance engineer.

• Is this product securely installed in the chassis server blade slot?

• Is this product installed in the correct server blade slot location?

• Is the chassis main power on?

• Is the chassis power cable connected properly?

• Is there an outside power disruption, blackout, etc.?

■

The hard disk access LED is not turned on.

This product may fail. Contact your maintenance engineer.

■

The hard disk status LED lights up amber.

A hard disk unit error may be detected. Leave this product as is and contact your maintenance engineer.

■

An error message about this product is displayed in the server.

Although you can use this product within a scope which does not affect operation, leave this product as

is and contact your maintenance engineer to check the cause of the error message.

■

The disk is not recognized by the server.

Check the following. If you cannot solve the problem, leave this product as is and contact your

maintenance engineer.

• Is the SAS cable connected properly?

• Is the hard disk unit installed securely?

«
...
23
24
25
26
27
...
»

Содержание PRIMERGY SX650






























Отзывы:

Нет отзывов