Fujitsu PRIMERGY RX600 S3, Руководство пользователя

Страница: 240 / 305

240
Chapter 8 Configuring Hardware and Utilities
8.2.3 Boot Maintenance Manager
In the Boot Maintenance Manager, the boot settings, such as the boot device order and the timeout
period for automatic OS startup, can be configured.
1
Turn on the server and start up the System Options menu.
J
"8.2.1 System Options Menu" (pg.238)
2
Press the [
↓
] key to select [Boot Maintenance Manager] and press the [Enter]
key in the System Options menu.
3
The Boot Maintenance Manager starts up and the following screen appears.
4
Use the [
↓
] key to select the desired setting, and press the [Enter] key.
table: Submenus of Boot Maintenance Manager
Item Description
Boot Options Sets the boot device order and the boot device for each device type. For
setting procedures, refer to "
„
Boot Options" ( J pg.241).
Driver Options This option cannot be used for this server. Do not select this.
Set Time Out Value Sets the timeout period for automatic startup. For setting procedures,
refer to "
„
Set Time Out Value" ( J pg.242).
Reset System Restarts the system.
If you select [Reset System] and press the [Enter] key, the system
restarts.
Boot Maintenance Manager
> Boot Options
> Driver Options
> Set Time Out Value
> Reset System
Modify the system boot order and add/delete
Boot Options. System reboot is required
after any Boot Option change.
Esc = Exit
F9 = Default BootOrder
<Enter> = Select Entry
= Move Highlight