Fujitsu Primergy RX600 S2, Руководство пользователя

Страница: 241 / 299

241
PRIMERGY RX600 S2 User’s Guide
8
Con
figurin
g Hardwa
re
a
nd utili
ties
8.3.3 Processor Menu
The CPU information is displayed on the [Processor] menu, and you can change the settings here.
table: Items on the Processor Menu
Item Settings Description
Core Frequency The frequency of installed CPU is displayed.
Bus Frequency The FSB of installed CPU is displayed.
Processor Retest • Enabled
• Disabled
（
initial value
）
Boot Processor Number The boot processor number is displayed.
Processor #1 Information The CPU information is displayed. Select the number of the processor you
want to check, and press the [Enter] key to display "
■
Processor #1 to 4
Information Screen" ( pg.242) where the detailed information on installed
CPU is displayed.
Processor #2 Information
Processor #3 Information
Processor #4 Information
Hyper-Threading Enable
• Enabled
（
initial value
）
• Disabled
Set whether or not to enable the hyper-
threading function.
Speed Step (TM)
Auto
（
unchangeable
）
These are CPU internal settings.
Execute Disable Bit
Enabled
（
unchangeable
）
Hardware Prefetcher
Enabled
（
unchangeable
）
Adj. Cache Line Prefetch
Enabled
（
unchangeable
）
Enhanced Halt State
Enabled
（
unchangeable
）
BIOS SETUP UTILITY
Processor
Main Processor Memory Devices Server Security Save, Restore & Exit
Examine and set system Processor parameters.
Core Frequency
Bus Frequency
Processor Retest
Boot Processor Number
> Processor #1 Information
> Processor #2 Information
> Processor #3 Information
> Processor #4 Information
Hyper-Threading Enable
Speed Step (TM)
Execute Disable Bit
Hardware Prefetcher
Adj. Cache Line Prefetch
Enhanced Halt State
3.16GHz
667MHz
<Disabled>
Processor #1
<Enabled>
<Auto>
<Enabled>
<Enabled>
<Enabled>
<Enabled>
Frequency at which processors currently
run.
Esc = Exit
= Move Highlight