Fujitsu PRIMERGY RX4770 M6, Руководство по модернизации и обслуживанию, Страница: 339 / 468

Removing the TPM
▶
Lay the bottom system board on a soft, antistatic surface with its component
side facing down.
Figure 211: Removing the TPM screw
▶
Locate the slotted lower end of the TPM screw (1).
▶
Carefully loosen the TPM screw using a thin slotted screw driver (e.g.
watchmaker's screw driver) or the dedicated TPM screw driver (Japan) (2).
CAUTION
▶
Ensure to turn the screw
clockwise
in order to remove it.
▶
Slowly and carefully increase the pressure on the screw until it
begins to turn. The effort when loosing the screw should be as
low as possible.
Otherwise the thin metal bar may break, rendering it impossible
to loosen the screw.
▶
Remove the TPM screw (3).
▶
Remove the TPM on the upper side of the bottom system board.
System board and components
RX4770 M6 Upgrade and Maintenance Manual 339