Fujitsu PRIMERGY RX2530 M4, Руководство по модернизации и обслуживанию, Страница: 27 / 470

RX2530 M4
Upgrade and Maintenance Manual 27
Before you start
2.1 Classification of procedures
The complexity of maintenance procedures varies significantly. Procedures
have been assigned to one of three unit categories, indicating the level of
difficulty and required qualification.
At the beginning of each procedure, the involved unit type is indicated by one of
the symbols introduced in this section.
I
Please ask your local Fujitsu service center for more information.
2.1.1 Customer Replaceable Units (CRU)
Customer Replaceable Units are intended for customer self service and may be
installed or replaced as hot-plug components during operation.
I
Components that the customer is entitled to replace may differ according
to the service form in his country.
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/support/r
epair.html
Hot-plug components increase system availability and guarantee a high degree
of data integrity and fail-safe performance. Procedures can be carried out
without shutting down the server or going offline.
Components that are handled as Customer Replaceable Units
– Hot-plug HDD/SSD modules
– Hot-plug PCIe SSD modules
– Hot-plug PSUs
– Hot-plug fan modules
– Memory modules (not allowed for Japan)
– Expansion cards (not allowed for Japan)
Peripherals that are handled as Customer Replaceable Units
– Keyboard
– Mouse
Customer Replaceable Units (CRU)