Fujitsu PRIMERGY RX2450 M1, Руководство по модернизации и обслуживанию, Страница: 33 / 246

3.3 CE conformity
The system complies with the requirements of European
Regulations. Find the CE declaration on certificate portal:
https://sp.ts.fujitsu.com/sites/certificates/default.aspx
CAUTION
This is a Class A product. In a domestic environment this product may
cause RF interference.
▶
In this case the user may be required to take adequate measures.
To open the CE declaration applicable for your system, proceed as follows:
▶
Select the product class, e.g. "Industry Standard Servers".
▶
Select the subclass, e.g. "Rack server".
▶
Select your server, e.g. "PRIMERGY RX2450 M1".
▶
Select the document, e.g. "CE Cert PRIMERGY RX2450 M1".
3.4 FCC Class A Compliance Statement
If there is an FCC statement on the device, it applies to the products covered in
this manual, unless otherwise specified herein. The statement for other
products will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a
"Class A" digital device, pursuant to Part 15 of the FCC rules and meets all
requirements of the Canadian Interference-Causing Equipment Standard
ICES-003 for digital apparatus. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in strict accordance with the instructions, may cause
harmful interference to radio communications. However, there is no warranty
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
Important information
RX2450 M1 Upgrade and Maintenance Manual 33