Fujitsu PRIMERGY RX220, Инструкция по настройкам, Страница: 23 / 61

RX220
Options Guide 23
Main Memory Upgrading / exchanging main memory
5.2 Upgrading / exchanging main memory
Ê Open the server as described in the chapter “Preparation” on page 19 f.
Figure 4: Removing a memory module
Ê Flip the ejector tabs on each side of the slot outward (1). This levers an
installed memory module out of its slot.
Ê
Remove the memory module from the slot (2).
Figure 5: Installing a memory module
Ê Carefully press the memory module into the slot (1) until the ejector tabs on
both sides of it engage (2).
Ê
Close the server as described in the chapter “Completion” on page 45 f.