RX220
Options Guide
17
Safety Instructions
I
To protect the CD-ROM/DVD drive and prevent mechanical damage, as
well as premature wearing of the CDs, you should observe the following
advice:
–
Only insert the CDs in the drive when needed and remove them after
use.
–
Store the CDs in suitable sleeves.
–
Protect the CDs from exposure to heat and direct sunlight.
Note on the laser
The CD-ROM/DVD drive contains a light-emitting diode (LED) classified
according to IEC 825-1:1993:LASER CLASS 1.
V
CAUTION!
The CD-/DVD-ROM drive contains a laser diode (LED). Sometimes the
LED produces a stronger laser beam than laser class 1. Direct view into
this laser beam is dangerous.
Never remove parts of the CD-/DVD-ROM drive assembly!
Modules with electrostatic-sensitive devices
Electrostatic-sensitive components are identified by the following sticker:
Figure 1: ESD label
V
CAUTION!
When you handle components fitted with ESDs, you must observe the
following points under all circumstances:
●
Remove the power plug from the power socket before inserting or
removing components containing ESDs.