manualshive.com logo in svg

Fujitsu PRIMERGY RX1330 M4, Руководство по модернизации и обслуживанию, Страница: 267 / 403

Поделиться
Скачать
Fujitsu PRIMERGY RX1330 M4 Скачать руководство пользователя страница 267

13

Front panel

13.1

Safety notes

CAUTION

▶

When inserting the front panel module into the server, ensure not to
pinch or strain any connected cables.

▶

Circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Always discharge static
build-up (e.g. by touching a grounded object) before handling
electrostatic-sensitive devices (ESDs).

▶

Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.

▶

For more information, see 

"Important information" on page 29

.

13.2

Basic information

In case of a defective ambient temperature sensor, please replace the front
panel.

Front panel module

The front panel module consists of a holder and a front panel board. These
components are already pre-assembled. The USB connector of the front USB
cable must be installed in the dependant recesses of the holder. As an option
the holder can be equipped with a front VGA connector.

Front panel on QRL (10x 2.5-inch HDD configuration)

The front panel on QRL (Quick Release Lever) is only available for the servers
with a 10x 2.5-inch HDD configuration. The front panel is mounted on the right
QRL. A flat cable is used for connection to the system board.

RX1330 M4

Upgrade and Maintenance Manual

267

Содержание PRIMERGY RX1330 M4




















































































































































































































































































































































































































Отзывы:

Нет отзывов