209
PRIMERGY RX100 S3 User’s Guide
8
Co
nf
igurin
g Hardwa
re and Utili
tie
s
8.1.6 Peripheral Configuration Submenu
This submenu appears when selecting "Peripheral Configuration" from the advanced menu.
Use this submenu to set the serial port, parallel port, etc.
table: Items on the Peripheral Configuration Submenu
Item
Setting
Description
Serial 1
• Disabled
• Enabled
• Auto (Initial value)
Configures Serial Port 1.
You can set this item only when [Serial
Multiplexer] is set to [System].
Note:
Set this item to [Enabled] when"
pg.220) [Console
Redirection] is set to [Enabled] and [Media
Type] is set to [LAN].
Serial 1 Address
3F8h, IRQ 4 (Unchangeable)
Configures I/O port address for Serial Port 1.
Serial Multiplexer
• System (Initial value)
• BMC
Configures function of Serial Port.
USB Enable Ports
• None
• All (Initial value)
Sets whether or not to use the USB port.
USB 2.0 Host Controller
• Disabled
• Enabled (Initial value)
Sets whether or not to enable the USB controller
(2.0 standard).
You can set this item only when [USB Enable Ports]
is set to [All].
USB BIOS Supported
Devices
Auto (Unchangeable)
Sets whether the USB device can be used on the OS
that does not support USB.
You can set this item only when [USB Enable Ports]
is set to [All].
USB Boot Delay
Os (Unchangeable)
Sets the delay time by the second for initializing
USB mass storage device during the POST.
You can set this item only when [USB BIOS
Supported Devices] is set to [None].
Item Specific Help
Select Item
Select Menu
Change Values
Select Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F7
Setup Defaults
Previous Values
Advanced
Security
Server
Exit
Main
Configure serial port
using options:
[Disabled]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
Peripheral Configuration
Serial 1:
Serial 1 Address:
Serial Multplexer:
USB Enable Ports:
USB 2.0 Host Controller:
USB BIOS Supported Devices:
USB Boot Delay:
ATA Controller Config
Mouse Controller:
[Auto]
[3F8h,IRQ 4]
[System]
[All]
[Enabled]
[Auto]
[0 s]
[Auto Detect]
Содержание Primergy RX100 S3
Страница 38: ...38 Chapter 1 Overview ...
Страница 52: ...52 Chapter 2 Checking before OS Installation ...
Страница 200: ...200 Chapter 7 Installing Internal Options ...
Страница 232: ...232 Chapter 8 Configuring Hardware and Utilities ...