Fujitsu Primergy RX100 S2, Руководство пользователя

Страница: 145 / 275

145
PRIMERGY RX100 S2 User’s Guide
1
2
3
4
5
6
7
9
8
Operatio
ns
after O
S
In
st
al
lation
5.4.2 Creating a Hardware Configuration Tool
This section explains how to create a Hardware Configuration Tool from the ServerStart CD-ROM.
Prepare floppy disks as many as the tools you want to create beforehand.
Types of a Hardware Configuration Tool vary by model.
1
Start up ServerStart and click [FloppyBuilder].
For the procedure, refer to Steps 1 and 2 in "5.4.1 Creating a DOS Floppy Disk" ( pg.141).
2
Click [Hardware Configuration Tool].
3
Click the tool you want to create.
Insert the prepared floppy disk by following the message.
4
Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The respective tools will be created automatically. When a message appears indicating that
creating the disk is completed, click [OK] and eject the disk.