4 Cleaning
63
E
4
Cleaning
This chapter explains cleaning for this product.
Head cleaning will be performed automatically when a cleaning cartridge is inserted into this
product.The cleaning cartridge is ejected when cleaning operations are complete.
Cleaning takes about three to five minutes.
`
This product uses a magnetic head to write and read data. If soiled with dust or dirt, the
magnetic head does not read or write data correctly. Also, it could reduce the life of the data
/ data cartridge, scratch the magnetic surface of the tape, or cause other kinds of trouble
making it impossible to use. To avoid trouble, clean the head occasionally using a cleaning
cartridge.
4.1
Cleaning Cartridge That can be Used
Use the following cleaning cartridge for this product.
`
The CLEAN LED blinks on when cleaning is required. If this LED is on, insert a cleaning
cartridge into the drive to clean it.
`
The cleaning cartridge can be used 50 times maximum. Five years after purchasing the
cleaning cartridge, replace it with a new one even when it is used less than 50 times.
`
If the CLEAN LED turns on and the cleaning cartridge is ejected immediately (approx. 40
seconds) after it is inserted, replace the cleaning cartridge with a new one.
Product name
Supplier
Ultrium Universal Cleaning Cartridge (LTO FB UL-1 CL UCC E)
FUJI PHOTO FILM Co.,LTD.
