48
1.2
Setting Jumpers
When installing the unit to the server, a SCSI-ID must be set.
The SCSI-ID can be set using the short jumpers on the rear of the unit. Follow "Installing Internal
Options" in "User's Guide" in "PRIMERGY Document & Tool CD" provided with the server to set
SCSI-ID number.
• The rear of the unit
The SCSI-ID can be set as shown in the following table.
`
Do not install jumpers other than SCSI-ID locations.
SCSI-ID
Short jumper
3
2
1
0
0
Open
Open
Open
Open
1
Open
Open
Open
Short
2
Open
Open
Short
Open
3
Open
Open
Short
Short
4
Open
Short
Open
Open
5
[*]
Open
Short
Open
Short
6
Open
Short
Short
Open
7
Short
Short
Short
Short
8
Short
Open
Open
Open
9
Short
Open
Open
Short
10
Short
Open
Short
Open
11
Short
Open
Short
Short
12
Short
Short
Open
Open
13
Short
Short
Open
Short
14
Short
Short
Short
Open
15
Short
Short
Short
Short
*: Settings at the time of purchase
3
2
1
0
SCSI ID
No jumper installation
