Fujitsu PRIMERGY BX620 S4, Руководство пользователя

Страница: 194 / 276

194
Chapter 7 Installing Internal Options
7.6 Installing an Expansion Board
One expansion board can be installed in this Server Blade. When the expansion
board is installed, you can connect to external devices, etc. through the Network
Blade.
7.6.1 Location of Expansion Board Installation
Install the expansion board in the expansion board slot in the Server Blade.
• When installing or removing an expansion board, make sure to remove the
Server Blade from the Chassis. Failure to do so may cause electric shock.
For details on how to remove the Server Blade from the Chassis, refer to
"BX600 S3 Blade Server System Unit Hardware Guide".
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the Chassis to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
• Expansion boards are susceptible to static electricity. Place them on
conductive pads or keep them in their packaging as long as they are not
necessary.
Expansion board slot