Fujitsu PRIMERGY BX620 S4, Руководство пользователя

Страница: 186 / 276

186
Chapter 7 Installing Internal Options
7.4.3 How to Install/Remove Memory Module
This section explains how to install and remove memory modules.
1
Turn off the Server Blade.
→
"3.3 Turning Off the Server" in "BX600 S3 Blade Server System Unit Hardware Guide"
2
Touch a metal part of the Chassis to discharge static electricity.
3
Remove the Server Blade from the Chassis to install a memory module.
→
"4.2 Installing Server Blades/Storage Blades" in "BX600 S3 Blade Server System Unit
Hardware Guide"
4
Remove the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.174)
5
Install or remove memory modules.
When installing
Insert a memory module properly into the memory slot. The levers close. If the levers are not
closed completely, push them with your fingers.
When removing
Open the levers on both ends.
6
Check that the memory module is inserted all the way.
7
Attach the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.174)
• Make sure not to open the clips outward too quickly because the memory
module may pop up, which could cause damage.
• An improperly engaged memory module could cause a fire. Do not insert the
memory module on the wrong side.
Lever
Align
notch