Fujitsu PRIMERGY BX620 S4, Руководство пользователя

Страница: 184 / 276

184
Chapter 7 Installing Internal Options
Notes on installing memory modules
Identifying memory modules
Make sure to install a pair of DIMMs, each having the same capacity. Check that the number beginning
with "CA" (e.g., CA05946-E101) printed on the label is same on the two DIMMs. Be sure to use a pair
of modules with the same number.
If the DIMMs have identification labels, be sure to install a pair of DIMMs with the same capacity with
the label placed on the same location.
• Identification label location
• Identification label patterns
When a memory module is viewed with the corner circled in the above figure to the lower left,
identification labels are applied in any of the following patterns.
table: Identification Label Patterns
Pattern Label A Label B Label C
1
Not applied Not applied Not applied
2
Applied Not applied Not applied
3
Not applied Applied Not applied
4
Not applied Not applied Applied
5
Applied Applied Not applied
6
Applied Not applied Applied
7
Not applied Applied Applied
8
Applied Applied Applied
Identification label A
Identification label B Identification label C