Fujitsu PRIMERGY BX620 S4, Руководство пользователя

Страница: 117 / 276

117
PRIMERGY BX620 S4 Server Blade User’s Guide
5.5 Notes Before Operating the
Server
This section explains the settings required before starting to operate the server.
For details on the settings, refer to the following URL.
http://www.microsoft.com/technet/prodtechnol/exchange/2003/Library/default.mspx
If a LAN card or 1 Gbit/s Ethernet I/O Module was added, install a driver according to "4.3 Installing the
LAN Driver" ( pg.89).
To connect optional SCSI devices, refer to "Chapter 7 Installing Internal Options" ( pg.171).
For the settings for the installed High Reliability Tools, refer to "Chapter 6 High Reliability Tools"
( pg.163) and the manuals of each application.
For notes on ServerView security, refer to "Security" in "1.1.7 Note" in the "ServerView User's Guide".
5.5.1 Auto-run Function from CD/DVD Drives
Perform the following procedures to change the settings of the auto-run function from the CD/DVD
drives after server installation:
1
Make the registry editable, and change the value of AutoRun of the following
registry key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CDRom
To enable auto-run, set the value of AutoRun to "1", and to disable auto-run, set the value to "0".
2
Restart the system.
The setting is enabled after the system is restarted.
5.5.2 Drive Letter Assignment in Expert Mode
In expert mode, you cannot specify a drive letter to a particular partition arbitrarily. Drive letters
specified with Disk Manager in expert mode will be sequentially assigned from the first partition with
"C, D, E..." when installation is completed, and an unused drive letter will be assigned to the CD-ROM
drive.
To change the drive letter, perform the following procedures after installation.
You cannot change the drive letters for the system and boot drive.