Fujitsu PRIMERGY BX600 S3, Руководство по оборудованию

Страница: 80 / 103

80
Chapter 6 Technical Information
• USB Floppy submenu
Set the floppy disk drive of the client computer to be emulated.
Item Setting value Description
Floppy Emulation • No Emulation
• Floppy (A:)
• Open HDD Image
File
Select the floppy disk drive to be emulated.
The selected floppy disk and floppy disk image are copied to
the advanced KVM module memory, and emulated as a
remote USB floppy of the specified Server Blade until the
Global Viewer session ends.
• No Emulation: They are not emulated.
• Floppy (A:): Floppy disk drive in A drive is emulated
(Displays the number of drives that the client computer
recognizes).
• Open HDD Image File: Previously saved hard disk images
are emulated.
Note:
Performing emulation only does not enable the floppy
disk drive to be used. It is necessary to mount the
floppy disk drive and to select USB Switch.
Mount Floppy Drive
←→
UnMount Floppy
Drive
–
Mount/unmount the virtual floppy disk drive to the advanced
KVM module.
• Mount Floppy Drive: Mount the virtual floppy disk drive
to the advanced KVM module.
• UnMount Floppy Drive: Unmount the virtual floppy disk
from the advanced KVM module.
Note:
Mounting the drive only does not enable the floppy
disk drive to be used. It is necessary to emulate data
and to select USB Switch.
Save Image To
–
Save the emulated floppy data (data read in the advanced
KVM module) in the floppy disk drive of the client computer
or in the hard disk as a floppy image.
Note:
If a virtual floppy disk drive is unmounted without
performing this operation when the emulated floppy
data has been modified, the modified data will not be
saved.
This cannot be selected without emulating floppy
data.
UFI Command
Block
[for Linux
Installation]
–
Set this to enabled only when Linux is installed via the
advanced KVM module.
Click this item to enable it. After it has been enabled a check
mark is displayed for the item.