Fujitsu PRIMERGY BX600 S3, Руководство по оборудованию

Страница: 12 / 103

12
Chapter 1 Component Names and Functions
1.2 Server (Rear View)
The following are the component names of the server (rear view).
7
9
8
1
4 3 2
6
[Default]
10
5
1
KVM module slot
One KVM module is installed. It can be replaced with
an optional advanced KVM module.
2
KVM connector
Connect the KVM cable and then connect the keyboard,
display and mouse.
3
Rear maintenance LED
This works in conjunction with the front maintenance
LED and lights/blinks in the cases below. The LED
colors vary depending if the default KVM module is
used or an optional advanced KVM module is installed.
LED status
Server Status
Default
With
advanced
KVM
module
Blinking
(Amber)
Blinking
(Green)
An error in an internal component
of the server has been detected.
Contact an office listed in the
"Contact Information" of "Start
Guide" or device administrator.
ON
(Amber)
ON
(Green)
This can be turned on by pressing
the rear maintenance switch or
using the "System Indication LED
Display" function in the
management terminal. For details
about the "System Indication LED
Display" function refer to "BX600
Management Blade Hardware
Guide" and "ServerView User’s
Guide".
4
Rear maintenance switch ( )
Pressing this switch turns the front and rear maintenance
LEDs ON.
The advanced KVM module (PG-KVB103) does not
have this switch.
5
Power Supply Unit (PSU) 3/4 (Option)
The dummy PSU is installed in by default.
There are 3 Chassis cooling fans installed in the dummy
PSU. The dummy PSU does not supply power.
When the optional PSU is installed, it enables
redundancy of the power supply.
6
Network blade slot 1/2
The slot number is "NET1" and "NET2" displayed on
the Chassis. Up to two LAN Network Blades can be
installed.
7
Network blade slot 3/4
The slot number is "NET3" and "NET4" displayed on
the Chassis. Up to two LAN Network Blades or FC
Network Blades, can be installed.
8
System fan unit 1/2
9
Management Blade 1/2
Two Management Blades are installed by default.
The redundant management function can be used.
10
Power Supply Unit (PSU) 1/2 (Default)
There are 2 Chassis cooling fans and 1 power cooling
fan installed in the PSU. When added to the PSU it
enables redundancy of the power supply.
ID