manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, Руководство по проектированию систем

Поделиться
Скачать
Fujitsu PRIMEQUEST 440 Скачать руководство пользователя страница 236

10-2

C122-B001-02EN

CHAPTER 10 Backup and Restoration

 

The methods above include a method that uses a backup server with a backup unit.  
Contact a Fujitsu sales representatives and prepare the backup software program and 
the backup server.

An overview of each backup and restoration method is provided below.

10.2.1

OS-standard utility (Linux:  dump/restore, Windows:  

NTBackup)

There are two types of file backups.  One is backup on a relatively small scale, such as 
backing up a specific file and directory, and the other is backup on a large scale, such 
as backing up the entire system volume.

This section explains the backup and restoration of the entire system volume by using 
the dump and restore commands, which are Linux standard utilities, and the backup 
and restoration of files by using NTBackup, which is a Windows standard utility.

Configuration example when using an OS-standard utility

• Local backup

For Linux:

Prepare an external unit to which backup data is to be saved for each partition.

 

Enter the dump or restore command from the OS console of the partition (Partition#0 
in 

Figure 10.1

) to be backed up or restored.  A serial console or KVM console can be 

used as the OS console.

To perform restoration, the system needs to be started in rescue mode by using the 
installation CD.

For Windows:

For the backup or restore of a data area of a Windows system, NTBackup is used.  
The backup can be performed either from the GUI screen when the KVM console has 
been connected or with the backup command from the command prompt screen.

However, the restoration can be performed only from the GUI screen.  Files cannot be 
restored with a backup command from the command prompt screen.

Содержание PRIMEQUEST 440

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды