Fujitsu PFU Rack2-Filer Скачать руководство пользователя страница 302

Страница: 302 / 463

Chapter 8 Exporting to a Cloud Service/Mobile Device

302|

Rack2-Filer User's Guide

8.1

Selecting Data to Be Exported

There are three ways to export Rack2-Filer data to cloud service/mobile:

(1) Selecting a binder and exporting it
(2) Exporting a page
(3) Exporting a stack

Selecting a binder and exporting it

All pages in the binder selected in the Rack2-Filer window are saved as a PDF
file.

In the Rack2-Filer window, select the binder to be exported
to cloud service/mobile.

Click

, or right-click on the binder spine, and select

the menus as follows:

• To export to Evernote

[Export to] - [Evernote]

• To export to Google Docs

[Export to] - [Google Docs(TM)]

• To export to Salesforce Chatter

[Export to] - [Salesforce Chatter]

• To export to SugarSync

[Export to] - [SugarSync]

• To export to mobile

[Export to] - [iPad/iPhone/iPod touch]

Содержание PFU Rack2-Filer
















































































































































































































































































































































































































































































Результаты поиска

Содержание PFU Rack2-Filer

Отзывы:

Fujitsu PFU Rack2-Filer, Руководство пользователя, Страница: 302 / 463

Результаты поиска

Содержание PFU Rack2-Filer

Отзывы: