4.18 Setting a Job Sequence
207
4.18.4 Setting a Job Group
Assign the job menu set in
"4.18.3 Setting a Job Menu" (page 202)
to a job group. Users
included in a job group can use the job menus assigned to the group. Users included in
multiple job groups can use the multiple job menus assigned to those groups.
Up to 100 job groups can be set.
■
Adding a Job Group
This section describes how to add a job group.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Groups] tab.
The [Job Groups List] window appears.
3. Press the [New] button.
4. Enter the job group name for [Job Group Name].
Central Admin
Console
HINT
For details about displaying the window for setting a job sequence via Central Admin
Console, refer to the Scanner Central Admin User's Guide.