manualshive.com logo in svg

Fujitsu MB90460 Series, Руководство по оборудованию, Страница: 617 / 739

Поделиться
Скачать
Fujitsu MB90460 Series Скачать руководство пользователя страница 617

598

CHAPTER 23  512K / 1024K BIT FLASH MEMORY

23.5.3

 Time limit Exceeded Flag (DQ5)

The time limit exceeded flag indicates that the automatic algorithm execution time has 
exceeded the time defined within the flash memory (i.e., internal pulse count).   Table 
23.5-5 shows the transition of the time limit exceeded flag status.

■

When the Write Operation or Chip/Sector Deletion Operation is Executed.

When the read/access is executed after starting the write or chip/sector deletion automatic algorithm, this

flag is set to "0" if the execution time is within the defined time (required for writing/deletion), or it outputs

"1" if this execution time exceeds the defined time.  This is not related to the state in which the automatic

algorithm is being executed or has been terminated, so it can be determined whether the write/delete has

succeeded or failed.  Thus, when this flag is set to "1", it indicates that the write operation has failed if the

automatic algorithm is being performed by the data polling function or toggle bit function.

For example, a fail occurs if an attempt is made to write "1" to the flash memory with "0" written.  In this

case, the flash memory is locked and the automatic algorithm is not terminated.  Therefore, no valid data is

set in data polling flag (DQ7).  The toggle bit flag (DQ6) does not stop the toggle operation, so the

execution time exceeds the time limit.  Then, the time limit exceeded flag (DQ5) outputs "1".  This event

indicates that the flash memory has not been correctly used, but does not indicate that the flash memory is

not good.  If this event occurs, the reset command should be executed.

Table 23.5-5  Transition of the Time Limit Exceeded Flag Status

Operating 
status

Write operation
--> Completion

Chip/sector 
deletion
-->Completion

Sector deletion 
 wait-->Start

DQ5

DATA:5

Sector deletion
 temporary stop
-->Restart 
(Sector being 
deleted)

During the sector 
deletion temporary 
stop (Sector not 
being deleted)

Sector deletion
-->Deletion 
temporary stop
(Sector being 
deleted)

Operating status

Write operation

Chip/sector deletion operation 

DQ5

-  Status transition during abnormal operation

-  Status transition during normal operation

0-->DATA:5

0-->1

0

0

0

1

1

Содержание MB90460 Series




































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов