Fujitsu M3097G Скачать руководство пользователя страница 20

Страница: 20 / 163

2.3.1.2

Image processing function

Table 2.3 Image processing function

No.

Function name

Details function

Automatic separation
Line

drawing/Photo

(

)

automatic separation

Recognizes the photo area and Line

drawing

area in one scanning automatically, and outputs
data with applying dither processing or error
diffusion for the photo and the binarizing for the
line

drawing.

Outline extraction

Extracts the outline of the Line

drawing such as

a thick character.

Image emphasis

Emphasizes the black

white contrast to raise the

contrast.

Overlay (*1)

Overlays the pattern on the scanned data and
make the overlayed black data to white data.

Reverse image
(White/black conversion)

Converts white into black and black into white
of read data (binary data).

Mirror image

Turns over the both sides of read data.

Simplified dynamic
threshold

Changes the slice level of the binarizing
according to the density of the document.

Zooming

Magnifies or reduces the image data in the range
between 25% and 400% with 1% step.

Subwindow

4 Subwindow can be specified on Main window.

The functions above are all image processing circuit (IPC) functions.

*1 M3097G does not support overlay function.

Содержание M3097G




































































































































































Результаты поиска

Содержание M3097G

Отзывы:

Fujitsu M3097G, Руководство OEM, Страница: 20 / 163

Результаты поиска

Содержание M3097G

Отзывы: