Fujitsu M3096NT, Руководство оператора, Страница: 136 / 147

6 – 6
(e) Remove the bearing B.
(f) Mount the new pick roller in reverse
order of removal.
Bearing B
Figure 6.7 Remove the Pick Roller
NOTICE: When mounting the Guide A, note that the hooks of the retaining spring are
not pressed by the Guide A. (See figure bellow)
Guide A
Retaining spring
(c) Pinch the retaining spring and slide
it toward the roller. Free bearing A
from the bracket by sliding it
toward the roller.
Bearing A
Retaining spring
Figure 6.5 Move the Retaining spring
(d) Slide the pick roller shaft in the
direction of arrow B and remove
the shaft from bearing B. The
roller shaft can then be lifted and
removed as shown in Figure 6.7.
A
B
Bearing A
Figure 6.6 Slide the Pick Roller