Fujitsu LX390, Руководство по эксплуатации, Страница: 30 / 44

English Troubleshooting and tips
26 Fujitsu Technology Solutions
Troubleshooting and tips
If a fault occurs, try to resolve it using the measures described in this chapter. If you cannot resolve the fault,
contact your local sales office or computer dealer.
If you need to exchange the device, please note that you must return it to you dealer in its original packaging
together with proof of purchase (receipt). Keep your receipt and the original packaging in a safe place after
purchase.
Help if problems occur
Should you encounter a problem with your keyboard or mouse that you cannot resolve yourself:
► For further clarification of the problem, contact the Service Desk for your country (visit the Internet at
http://support.ts.fujitsu.com/contact/servicedesk/ServiceDeskNumber_Int.asp
).
The mouse is not detected or does not function
► Check that the mouse is switched on (on/off switch on bottom of mouse).
► Check whether the battery of the keyboard or of the mouse is properly inserted.
► Disconnect the receiver from the computer and reconnect it.
► The receiver may be too far from the keyboard / mouse.
► Check whether the USB port on the computer is correctly configured
► If the table to is made of glass or of a reflective material, this can interface with the mouse sensor. In this
case use an ordinary mouse pad or move to a more favourable desk.
► Restart the computer.
Connection problems with keyboard / mouse
The connection can be disturbed by other radio devices in the surrounding area that use the same
radio frequency.

Insert the receiver into another USB port of your computer.
On systems with a USB 3.0 port, connection problems may occur because of technical reasons.

Do not connect the receiver to a USB port which is very close to a USB 3.0 port which has a USB 3.0 end
device connected (e. g. immediately adjacent USB ports).

Where appropriate, use a USB extension cable to increase the separation.