Fujitsu LifeBook U9312 Скачать руководство пользователя страница 73

Страница: 73 / 82

Troubleshooting and tips

The notebook cannot be started

Notebook

Cause

Troubleshooting

The battery is dead.

► Connect the notebook to the mains voltage

via the mains adapter and charge the
battery.

The power adapter is not connected correctly.

► Check whether the mains adapter is

connected correctly to the notebook.

► Switch the notebook on.

The notebook stops working

Notebook

Energysaving mode

Cause

Troubleshooting

Notebook is in energy saving mode.

► Leave energy saving mode.

An application programme has caused the
malfunction.

► Close the application program or restart

the notebook (by restarting the operating
system or switching the device off and back
on again).

The battery is dead.

► Connect the notebook to the mains voltage

via the mains adapter and charge the
battery.

The printer does not print

Printerdoesnotprint

Cause

Troubleshooting

The printer is not switched on.

► Make sure that the printer is switched

on and ready for operation (refer to the
documentation supplied with the printer).

The printer is not connected correctly.

► Check that the data cable connecting

the notebook to the printer is properly
connected.

The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.

► Check that the data cable connecting

the notebook to the printer is properly
connected.

► Check whether the correct printer driver is

loaded (refer to the printer documentation).

Fujitsu

Содержание LifeBook U9312



















































































Результаты поиска

Содержание LifeBook U9312

Отзывы:

Fujitsu LifeBook U9312, Руководство по эксплуатации, Страница: 73 / 82

Результаты поиска

Содержание LifeBook U9312

Отзывы: