Fujitsu LIFEBOOK U7310 страница 41 Скачать руководство пользователя

Страница: 41 / 94

Working with the notebook

Memory cards

Slot

Your notebook is equipped with an integrated memory card reader.

Observe the manufacturer’s instructions when handling the memory cards.

Memory card

Supported formats

Your notebook supports the following format:

•

Secure Digital (SD

card)

Inserting the memory card

►

Carefully push the memory card into the
slot until you feel it click into place. The
label area must be facing upward. Do not
apply any force, otherwise the delicate
contact surfaces could be damaged.

Memory card

Depending on the particular type
used, the memory card may protrude
slightly from the slot.

Removing the memory card

Memorycard

In order to protect your data, always follow the correct procedure for removing
the card (see the documentation for your operating system).

►

On devices with card locking: Press
on the memory card (1).

Memory card

The memory card is released and
can now be removed.

►

Pull the memory card out of the slot (2).

Fujitsu

Содержание LIFEBOOK U7310































































































Результаты поиска

Содержание LIFEBOOK U7310

Отзывы:

Похожие инструкции для LIFEBOOK U7310

Бренды по названию

Популярные бренды

Fujitsu LIFEBOOK U7310, Руководство по эксплуатации

Результаты поиска

Содержание LIFEBOOK U7310

Отзывы:

Похожие инструкции для LIFEBOOK U7310

Бренды по названию

Популярные бренды