background image

20

L i f e B o o k   S   S e r i e s   N o t e b o o k   B I O S

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security 
features of your notebook to fit your operating needs and 
to view the current data security configuration. Follow the 
instructions for Navigating Through the Setup Utility to 
make any changes. 

(See Navigating Through the Setup 

Utility on page 2 for more information)

The following tables show the names of the menu fields 
for the Security menu and its submenus, the options for 
each field, the default settings and a description of the 

field's function and any special information needed to 
help understand the field's use. The default condition is 
no passwords required and no write protection

.

Figure 13.   Security Menu

Entering a password incorrectly three times 
in a row will cause the keyboard and 
mouse to be locked out and the warning 

[System Disabled]

 to be displayed. If 

this happens, restart the computer by 
turning off and on the power with the 
power switch and use the correct 
password on reboot.

If you set a password, write it down and 
keep it in a safe place. If you forget the 
password you will have to contact your 
support representative to regain access 
to your secured functions and data.

If you make an error when re-entering 
the password a 

[Warning] 

will be dis-

played on the screen. To try again press 
the [Enter] key and then retype the pass-
word. Press the [Esc] key to abort the 
password setting process.

If the Password on Boot is Disabled you 
will not have to type your password 
upon resuming the system from the Sus-
pend or Save-to-Disk modes.

F1

 Help

ESC

 Exit

Select Item

Select Menu

-/Space

Enter

F9

 Setup 

Defaults

F10

 Save and Exit

Change Values

Select  Sub-Menu

Main    Advanced    

Security

    Boot 

Info    Exit

Item Specific Help

Press <Enter> key to

set Supervisor Password

to enable any password 

features.

Then password entry is 

required to enter BIOS 

Setup.

PhoenixBIOS Setup Utility

Supervisor Password Is: 

Clear

User Password Is: 

Clear

Set Supervisor Password 

[

Enter

]

Set User Password 

[Enter]

Minimum User Password Length: 

[0]

Password on Boot: 

[Disabled]

   On Automatic Wake up: 

[Disabled]

KB Lock on Resume: 

[Disabled]

Boot from Removable Media: 

[All]

Flash Write: 

[Enabled]

Hard Disk Security

Owner Information

     ▲ ▲

Содержание LifeBook S6240





























Отзывы: