Fujitsu Lifebook P771 Скачать руководство пользователя

Страница: 47 / 87

Working with the notebook

Wireless LAN/BlueTooth/UMTS (optional)

The installation of radio components not approved by Fujitsu Technology Solutions
will invalidate the certi

cations issued for this device.

Switching the wireless components on and off

Before switching on your device for the

rst time, the on/off switch for

wireless components must be in the "ON" position.

►

Slide the ON/OFF switch into the "ON"
position to activate the wireless components.

WirelessLAN

Bluetooth

►

Slide the ON/OFF switch to the
"OFF" position to deactivate the
wireless components.

The Bluetooth and UMTS modules and the wireless LAN transmission unit (antenna)
will also be switched off when you switch off the wireless components.

You can also deactivate the wireless components individually in the

BIOS Setup

. In

order to be able to do this, you will either need to know the supervisor password
if one has been assigned, or no password must have been assigned.

Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.

Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.

You can

nd more information on how to use Bluetooth on the CD you

received with your Bluetooth software.

You can obtain more information on UMTS from your service provider.

Fujitsu Technology Solutions

Содержание Lifebook P771
























































































Результаты поиска

Содержание Lifebook P771

Отзывы:

Похожие инструкции для Lifebook P771

Бренды по названию

Популярные бренды

Fujitsu Lifebook P771, Руководство по эксплуатации

Результаты поиска

Содержание Lifebook P771

Отзывы:

Похожие инструкции для Lifebook P771

Бренды по названию

Популярные бренды