Fujitsu LIFEBOOK P727 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 128

Fujitsu LIFEBOOK P727 Скачать руководство пользователя страница 73

Fujitsu

71

Connecting external devices

Never pull at a cable when disconnecting it. Always grasp the plug.

With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconnecting.  For    more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external    device.

Some of the external devices require special drivers (see the operating
system and external device documentation).

HDMI port

The HDMI port on your notebook or the optional port replicator can be used to connect an
external amplifier, LCD TV or a plasma TV with an HDMI connection.

► Connect the data cable to the

external device.

► Connect the data cable to the HDMI

port on the notebook or on the
optional port replicator.

Connecting external devices

Under all circumstances, please observe the safety notes provided in the

"Important notes", Page 13

chapter before connecting or disconnecting

any devices to or from your notebook.

Always read the documentation supplied with the device you wish to connect.

Never connect or disconnect cables during a thunderstorm.

«
...
71
72
73
74
75
...
»

Содержание LIFEBOOK P727

































































































































Отзывы:

Нет отзывов